User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD 8VSB ATSC Modulator
ATSC Transmitter/Regenerative Translator
Instruction Manual, Rev. 2 41
Changing Parameters
Before changes to system parameters are accepted the user must first click the submit
button. The example below has the user clearing the alarm log in the Clear Log screen.
Figure 7: Example of Submitting a Parameter Change
Once the user has selected “Yes” for the Clear Log pull down box, the user will then
need to click Submit. At that time a small green box will appear at the bottom of screen
confirming the change.
Status Menu
The Status menu contains the following drop-down items, as seen in Figure 8.
• Global Status
Figure 8: Status Menu Selection