User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD 8VSB ATSC Modulator
ATSC Transmitter/Regenerative Translator
Instruction Manual, Rev. 2 40
GUI Navigation and Structure
The main (Global) status page seen in Figure 6 demonstrates the hierarchical structure
of the Web GUI interface. Along the top of the page are a row of five icons with drop
down menus. The five menu categories accessible via the Web GUI interface are:
• Status – Displays the current operating status of the modulator
• Config – Provides access to change the modulator operating parameters
• Alarms – Alarm status and settings as well as alarm log information
• NMS Users – Set user(s) log in authorization level, passwords and other
information
• System Parameters – Set access control, network and SNMP parameters. Also
used for system reset and software upgrades
The menu tree for the Web GUI is shown below:
Status Config Alarms NMS Users System
Parameters
    
Global Status Modulator Mode Alarm Properties User Properties Identification
Transmission Clear Logs Access Control
Input Alarm Status Network
Parameters
Output SNMP Parameters
RF Channels System Time
Non-linear
Pre-corrector
Heartbeat Time
Linear
Pre-corrector
System Reset
Site User
Configuration
UART Baudrate Download Config
File(s)
Digital
Pre-corrector
Upgrade and
Files Upload
List Uploaded
Files
Table 6: Web GUI Menu Structure