User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD Unpacking, Installation &
ATSC Transmitter/Regenerative Translator Maintenance
Instruction Manual, Rev. 2 20
Unpacking, Installation and Maintenance
Unpacking
UBS-Axcera certifies that upon leaving our facility all equipment was undamaged and in
proper working order. It is imperative that all packages be inspected immediately upon
arrival to verify that no damage occurred in transit to the site.
Inspect all packages for exterior damage and make note of any dents, broken seals, or
other indications of improper handling. Carefully open each package and inspect the
contents for damage.
Verify that all materials are enclosed as listed on the packing slip. Report any shortages
to UBS-Axcera. In the event any in transit damage is discovered, report it to the carrier.
UBS-Axcera is not responsible for damage caused by the carrier.
If the equipment is not going to be installed immediately, return all items to their
original packaging for safe storage. Save all packing material for future use. If
equipment is ever removed from the site, the original packaging will ensure its safe
transport.
Figure 1: CU2TD Front View - Typical Racking Plan