User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD ATSC Web Ethernet
Transmitter/Regenerative Translator Interface Description
Instruction Manual, Rev. 2 105
Manage Accounts Page
The user can access the Manage Accounts page by selecting the 'Manage Accounts'
button on the CX Ethernet Controller Configure page.
Figure 59: Typical Manage Accounts Page
The Innovator CX Ethernet controller supports up to 5 different user accounts. To add or
change one of the accounts, click the ‘Add/Change’ button in the row of the account you
want to modify. Enter the desired name, password, and administrator or read/write
access rights for the user and click save.
NOTE: The transmitter's set up menus contain a Reset Ethernet User ID page. This
page allows a user to reset the first account User Name and Password. The Yes or No
selection can be changed by pushing the Up or Down Button. After the selection has
been made, the user needs to depress the right or left arrow and then the display will
ask “PUSH ENTER TO ACCEPT CHANGES”. If the ENTER button is depressed, the change
will be accepted. If any other button is depressed, the change will not be made. If Yes
is selected on the page, and accepted, the User name and Password will reset to the
factory default of admin / UBS-Axcera.
Activate the 'Back' button to return to the main control/monitoring page.
When you have completed using the web interface, please remember to log out via the
'Logout' button at the top of the control/monitoring page.