User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD ATSC Web Ethernet
Transmitter/Regenerative Translator Interface Description
Instruction Manual, Rev. 2 103
View Events Page
The user can access the transmitter's event log by selecting the 'View Events' button
on the CX Ethernet Controller main control/monitoring page.
Figure 57: Typical Event Log Page
This page allows the user to view events and to determine the time between events.
Events are logged in the order they are received. If more than 200 events are detected,
the transmitter's System Controller drops the oldest event to record the new event.
Transferring of events from the transmitter's System Controller and the Ethernet
Controller is scheduled so that device details are continuously monitored. Therefore the
event log page may update a few seconds behind the transmitter display when the log is
full or changing quickly.
Each event record indicates the event number, the number of events, an occurrence
counter and text describing the event. The occurrence counter keeps track of the
number of times a specific event has occurred since the log was last cleared. Up to 99
occurrences are available for each event.
To view the next set of twenty events, activate the 'Next' button. If viewing events
higher in the log, the 'Previous' button allows you to return to prior events.
The user can return to the main control/monitoring page by selecting the 'Back' button.