User's Manual

Innovator CU0TD-1/CU0RD-1 – CU4TD/CU4RD ATSC Initial On Site
Transmitter/Regenerative Translator Turn On Procedure
Instruction Manual, Rev. 2 98
Figure 54.1.11: Chassis Values Ethernet Option Set-Up Screen
This screen is only displayed if Ethernet Controller is not present in your
system.
Figure 54.1.12: Chassis Values Reset Ethernet User Name Set-Up Screen
When the optional Ethernet Controller is present, this screen is displayed. It
is used to reset the first username / password account of the Ethernet
controller. There are a total a five accounts available on the Web. If this
operation is selected, ON, and the change accepted, only the fist username /
password account file is replaced, with the user name set to ‘admin’ and the
password set to ‘UBS-Axcera’.
Figure 54.1.13: Chassis Values Ethernet Address Set-Up Screen
When the optional Ethernet Controller module is present, this screen is used
to view or change the Ethernet TCP Address of the controller.
Figure 54.1.14: Chassis Values Ethernet Netmask Set-Up Screen
When the optional Ethernet Controller module is present, this screen is used
to view or change the TCP subnet mask of the Ethernet controller.
Figure 54.1.15: Chassis Values Ethernet Gateway Set-Up Screen
When the optional Ethernet Controller module is present, this screen is used
to view or change the TCP gateway (router) address of the Ethernet
controller.
Figure 54.2: Modulator Main Set-Up Menu Screen
This is the System Set-Up Modulator Main Sub Screen. Push the ENTER button to
access the Set-Up Modulator submenus or push the DOWN Arrow to view the next
Set-Up Main Sub Screen, which is the Set-Up Upconverter Main Sub Screen.
NOTE: Refer to the description in Table 30B for how to change the values on the
following set-up screens.
Figure 54.2.1: Modulator Primary Input Selection Set-Up Screen
This screen allows the user to select between an A and a B source input to the
modulator. When set to automatic, the modulator will automatically sense an
input and chose that input as the primary input.