User's Manual Part 2

CL1TC-4 400W DVB-H Transmitter Alarms
Product Manual, Rev. 1 137
10.6.14 Power Module 2 Current Fault
Power
Module 2 Current Fault (Critical)
14.0 A
Power Module 2 Current Fault – set when the power module 2 current reaches 14.0 A.
NOTE: Automatic HPA shutdown is initiated by the HPA when the critical levels are reached
and a HPA Failure alarm is raised. The Web-GUI interface has no control over this action.
10.6.15 Power Module 3 Current Fault
Power
Module 3 Current Fault (Critical)
14.0 A
Power Module 3 Current Fault – set when the power module 3 current reaches 14.0 A.
NOTE: Automatic HPA shutdown is initiated by the HPA when the critical levels are reached
and a HPA Failure alarm is raised. The Web-GUI interface has no control over this action.
10.6.16 Power Module 4 Current Fault
Power
Module 4 Current Fault (Critical)
14.0 A
Power Module 4 Current Fault – set when the power module 4 current reaches 14.0 A.
NOTE: Automatic HPA shutdown is initiated by the HPA when the critical levels are reached
and a HPA Failure alarm is raised. The Web-GUI interface has no control over this action.
10.6.17 Power Module 5 Current Fault
Power
Module 5 Current Fault (Critical)
14.0 A
Power Module 5 Current Fault – set when the power module 5 current reaches 14.0 A.
NOTE: Automatic HPA shutdown is initiated by the HPA when the critical levels are reached
and a HPA Failure alarm is raised. The Web-GUI interface has no control over this action.
10.6.18 Power Module 6 Current Fault
Power
Module 6 Current Fault (Critical)
14.0 A
Power Module 6 Current Fault – set when the power module 6 current reaches 14.0 A.
NOTE: Automatic HPA shutdown is initiated by the HPA when the critical levels are reached
and a HPA Failure alarm is raised. The Web-GUI interface has no control over this action.