User's Manual Part 2
CL1TC-4 400W DVB-H Transmitter Modulator Front Panel
Product Manual, Rev. 1 115
8.7.3 Config
x
Input
----------------------------------------
Config, Input
<SELECTED INPUT> IP Input Interface ...
----------------------------------------
Shortcut: To directly reach this menu Press EXECUTE from Status Display b
The options are:
Item Selection
Selected Input A, B, Auto, IP
IP Input Interface Ethernet 1, Ethernet 2
Input Stream Dst IP Standard IP address: 0.0.0.0..255.255.255.255
Input Stream Dst Port Range: 1025 .. 65535
FEC Mode None, Column Only, Column + Row
IP Input Buffer Depth Range: 0 .. 500 Packets
8.7.4 Config
x
Output
----------------------------------------
Config, Output
<MUTE ON/OFF> Bandwidth Spectrum Inv...
----------------------------------------
There are two possibilities for this menu depending on if the transmitter is currently
operating in MFN mode or SFN mode with Config From Stream On.
Shortcut: To directly reach this menu Press EXECUTE from Status Display c
The options are:
MFN Mode
Item Selection
Mute ON/OFF OFF, ON
Bandwidth 5 MHz
Spectrum Inversion OFF, ON
Window Enable OFF, ON
External Amplifier Gain Range: 0.0.. 6553.5 dB
RF Output Frequency Range: 167000000 .. 167500000 Hz
RF Power Level Range: -10.0 .. 0.0 dBm
RF Channel Grid DVBT UHF 8M 474-858 MHz, User Defined
Base Frequency Range: 167000000 .. 167500000 Hz
Base Channel Range: 1 .. 200