User's Manual Part 2

ManualsBrandsUBS-Axcera ManualsElectronics400-Watt, 1.6 GHz DVB-H Transmitter

CL1TC-4 400W DVB-H Transmitter Modulator Front Panel

Product Manual, Rev. 1 109

The start point in the Config Menu is:

----------------------------------------

DVB-TH L-Band TX

<CONFIG> Alarms NMS Users System Pa...

----------------------------------------

The full list of the level 1 menu items are:

• Config

• Alarms

• NMS Users

• System Parameters

There are a total of 3 menu levels in the Config Menu chain. Use the left e and right f

buttons to navigate between different sub-menu items. Use the down d button to enter a

sub-menu or the up c button to return to a higher level.

8.6 Config Menu Tree

he Config Menu tree is listed below. There are a total of 3 levels. In some cases there is a

shortcut to reach a specific menu directly from a specific Status Display by pressing the

EXECUTE button. The place where such a shortcut exists is denoted by a bracketed letter

(e.g., [f]) to represent the Status Display where the shortcut exists.

Note that the Config x Transmission menu has three possible structures. This reflects the

fact that the menu is different whether the transmitter is operating in MFN mode, SFN mode

or SFN mode with Config From Stream On.

Level 1 Level 2 Level 3

Config Modulator Mode Operating Mode

Config Transmission

[a]

MFN Mode

•SFN

•Config From Stream

•Fixed Delay

•Input_Output Fixed Delay

•Hierarchical Mode

•IFFT

•Coderate

•Constellation

•Guard Interval

•Interleaver Flag

•Time Slice Indicator, HP

•MPE-FEC Flag, HP

•Cell Id

SFN Mode