User's Manual Part 2

CL1TC-4 400W DVB-H Transmitter Modulator Front Panel
Product Manual, Rev. 1 104
The “current” menu item is always shown in capitalized format with “< >” brackets. If there
are more menu items than the LCD can display, three (3) dots are shown in the lower right
position – see Example A.
Example A
----------------------------------------
DVB-TH L-Band TX
<CONFIG> Alarms NMS Users System Pa...
----------------------------------------
If the user presses the 8 button, the display will shift to the left and the next menu item
will be selected – see Example B.
Example B
----------------------------------------
DVB-TH L-Band TX
<ALARMS> NMS Users System Parameters...
----------------------------------------
If the user presses the 6 button in Example A, the highlighted menu item will be selected
and the user will enter the sub-menu – see Example C.
The character string “DVB-TH L-Band TX” is always positioned in the top left corner of the
display, followed by the menu name. The available menu items are shown on the second
line and may be selected using the 3 and 8 buttons. The “current” menu item is always
shown in capitalized format with “< >” brackets. If there are more menu options than the
LCD can display, three (3) dots are shown in the lower right position.
Example C
----------------------------------------
DVB-TH L-Band TX, Config
<MODULATOR MODE> Transmission Input ...
----------------------------------------
The lowest level of any particular “branch” produces a window that displays the available
parameter list; the selected value is shown in square brackets – see Example D.
The parameter name is shown in the top left corner of the display, followed by the “current”
value. The available menu items are shown on the second line and may be selected using
the 3 and 8 buttons. The “current” menu item is always shown in capitalized format with
“[ ]” brackets.
Example D
----------------------------------------
Spectrum Inversion = OFF
[OFF] ON
----------------------------------------
If an alpha numeric parameter is selected, the first digit of the “current” parameter flashes
and a cursor shows the position of the digit which can be edited (in this case, “a” from
“admin”) – see Example E.