User's Manual Part 2

CL1TC-4 400W DVB-H Transmitter WEB Interface
Product Manual, Rev. 1 82
6.7.3 Network Parameters
The Networ
k Parameters page allows the user to set the network parameters for the
modulator.
Note: The modulator must be reset following a change to any of the Network
Parameters.
Item Option
Management IP Standard IP address e.g., 172.20.25.80
Management Netmask Standard netmask field e.g., 255.255.0.0
Default Gateway Standard IP address e.g., 172.20.1.1
Redundant Peer IP Standard IP address e.g., 172.21.25.80
Not used for this application and should not be
modified by the user.
Second Etherport IP Standard IP address e.g., 172.20.25.81
Not used for this application and should not be
modified by the user.
Second Etherport Netmask Standard netmask field e.g., 255.255.0.0
Not used for this application and should not be
modified by the user.
Table 6-18 Network Parameters
Figure 6-35 Network Parameters