User's Manual Part 1

CL1TC-4 400W DVB-H Transmitter WEB Interface
Product Manual, Rev. 1 66
6.4.4 Output
The Ou
tput page allows the user to Mute the modulator output, set the Spectrum Inversion
and modify the RF Output Frequency and the modulator RF Power Level.
The menu options vary depending if the system is configured for SFN with “Config From
Stream” enabled or MFN operation (see section 6.4.2). When the system is in
MFN mode
the user can select the transmission bandwidth. If “Config From Stream” is enabled when
SFN mode is enabled, the bandwidth option is not available. The next two figures show the
Output configuration screen for both MFN and SFN operation.
Figure 6-16 Output Configuration (MFN Mode)