User's Manual Part 1

CL1TC-4 400W DVB-H Transmitter WEB Interface
Product Manual, Rev. 1 65
The available parameters are:
Item Selection
Selected Input A, B, Auto, IP
Choice of ASI port A, ASI port B, Auto selection between
ASI ports or an IP input.
IP Input Interface Ethernet 1, Ethernet 2
If Selected Input is set to IP this will determine which
Ethernet port is selected for the input stream.
Input Stream Dst IP Standard IP address: 0.0.0.0..255.255.255.255
Relevant only if Selected Input is set to IP and Fixed
Delay is OFF.
Input Stream Dst Port Range: 1025 .. 65535
Relevant only if Selected Input is set to IP and Fixed
Delay is OFF.
FEC Mode None, Column Only, Column + Row
Relevant only if Selected Input is set to IP and Fixed
Delay is OFF. This sets the Forward error Correction
(FEC) mode for the IP input as per the Pro MPEG CoP#3
standard for FEC protection of MPEG-2 transport streams
over an IP network.
IP Input Buffer Depth Range: 0 .. 500 Packets
Relevant only if Selected Input is set to IP and Fixed
Delay is OFF.
Table 6-5 Input Parameters