User's Manual Part 1

CL1TC-4 400W DVB-H Transmitter WEB Interface
Product Manual, Rev. 1 63
The available parameters for SFN mode with Config From Stream On are:
Item Option
SFN OFF, ON
Config From Stream ON, OFF
Fixed Delay OFF, ON
Input_Output Fixed Delay
Range: 13000 μsec .. 1 second
MIP Time Offset Function OFF, ON
MIP Frequency Offset
Function
OFF, ON
MIP Power Function OFF, ON
MIP Cell ID Function OFF, ON
Cell ID Range: 0 .. 65535
Transmitter ID Range: 0 .. 100
Local Delay Offset
Range: -500000.0 .. +500000.0 μsec
Table 6-4 Transmission Parameters (SFN Mode with Config From Stream On)
All of the above parameters are described in the DVB-TH standard. The above list includes
a number of optionalMIP parameters for remote adjustment of the transmitter signal:
• MIP Time Offset Function (tx_time_offset_function)
The tx_time_offset_function is used to apply a deliberate offset in time of the
transmitted DVB-TH signal, relative to the reference transmission time
(STS+maximum_delay) modulo 10
7
• MIP Frequency Offset Function (tx_frequency_offset_function)
The tx_frequency_offset_function is used to apply a deliberate frequency offset of
the centre frequency of the emitted DVB-TH signal relative to the centre frequency of
the RF channel.
• MIP Power Function (tx_power_function)
The tx_power_function can be used to remotely configure the transmitter ERP.
• MIP CellId Function (cell_id_function)
The cell_id_function can be used to configure the cell identifier of the transmitter.