User's Manual Part 1

CL1TC-4 400W DVB-H Transmitter WEB Interface
Product Manual, Rev. 1 62
The available parameters for MFN and SFN mode are:
Item Option
SFN OFF, ON
Config From Stream ON, OFF
If “Config From Stream” is ON, the modulation
parameters are set from the input SFN data stream and
the other modulation parameters of this web-page are
ignored. If it is set to OFF, the modulation parameters
can be configured locally.
Only relevant when SFN is enabled.
Fixed Delay OFF, ON
If “Fixed Delay” is ON, the output stream will be
synchronized to the input stream.
Only relevant when an ASI input is present.
Input_Output Fixed Delay
Range: 13000 μsec .. 1 second
Only relevant when an ASI input is present.
Hierarchical Mode None, aEq1, aEq2, aEq4
IFFT 2k, 8k, 4k
Coderate 1/2, 2/3, 3/4, 5/6, 7/8
Constellation QPSK, 16 QAM, 64 QAM
Guard Interval 1/32, 1/16, 1/8, 1/4
Interleaver Flag OFF, ON
Only relevant for a 2k and 4k IFFT.
Time Slice Indicator, HP OFF, ON
MPE-FEC Flag, HP OFF, ON
Cell ID Range: 0 .. 65535
Transmitter ID Range: 0 .. 100
Only relevant when SFN is enabled.
Local Delay Offset
Range: -500000.0 .. +500000.0 μsec
Only relevant when SFN is enabled.
Table 6-3 Transmission Parameters (MFN and SFN Mode)