User's Manual Part 1

CL1TC-4 400W DVB-H Transmitter WEB Interface

Product Manual, Rev. 1 57

6.3.3 HPA

he HPA page provides access to HPA information including the HPA TX On status (On of

Off), Input, Forward and Reflected power levels as well as sub-module current values and

heat sink temperature values.

• HPA Statuses: Displays the HPA Controller Firmware and CPLD versions as well as

the Input, Forward and Reflected RF (power) levels.

• HPA Settings: Displays the HPA Tx On status (ON or OFF), RF Output Power Level

(target), Precorrector Enable (OFF), Freeze ALC (ON or OFF) and RF Input

Frequency.

• Power Supply Voltage Levels: Displays the DC voltage for HPA Power Supply 1

and HPA Power Supply 2.

• HPA Current Levels: Displays the current consumption for the Pre-Driver, Driver

and Power Modules.

• HPA Temperature Sensors and Fans: Displays the temperature readings for the

Pre-Driver and Power Module heat sink temperature sensors as well as the fan speed

for the front panel fans.

• Temperature Sensor 1 – Power Module heat sink

• Temperature Sensor 2 – Power Module heat sink

• Temperature Sensor 3 – Pre-Driver heat sink

Figure 6-8 HPA