User's Manual Part 1

CL1TC-4 400W DVB-H Transmitter WEB Interface
Product Manual, Rev. 1 49
6 Web GUI Interface
6.1 Introduction
The tra
nsmitter parameters can be reviewed or changed using the Web GUI Interface. The
Web GUI interface is an intuitive interface allowing the user to access the current
transmitter status and set up the operational parameters of the transmitter. The Web GUI
interface uses a simple hierarchical menu structure which provides access to the transmitter
parameters.
The modulator needs to be assigned an IP address in order to access the Web GUI. The
transmitter is shipped from the factory with a default IP address of 172.20.33.69, but the
user will need to modify the IP address of each unit according to the local network. The IP
address can be accessed and modified from the console interface (CLI) or front panel
interface.
6.2 Access and Navigation
6.2.1 Login
Con
nect either locally or remotely via the modulator Ethernet port:
• Open a web browser window (e.g., Internet Explorer, Firefox, etc.) and enter the
modulator IP address. For example: http://172.20.33.69/
• The first menu page is the login page.
• The User Name field must be kept blank, while the default password for normal
access is “admin”.
Figure 6-1 Login Screen
Once the user successfully logs in, the Global status page is displayed. This page provides
global status information for the transmitter system.