User's Manual Part 1

CL1TC-4 400W DVB-H Transmitter Commissioning and Operation
Product Manual, Rev. 1 39
Note: The default IP address for the modulator is 172.20.33.69
Note: The default password for the Web GUI is “admin”
Figure 5-1 Network Parameters
Figure 5-2 System Reset
Alternatively, the modulator front panel LCD and cursor/EXECUTE keys can be used to
configure the modulator’s network parameters.
1. Navigate to the Status Display window “f” and press the “Execute” button. This will
take the user to a System Parameters sub-menu where the network parameters can
be re-configured as desired.
2. Once the Network Parameters have been re-configured, navigate to System
Parameters -> System Reset and reset the modulator.
3. Once the modulator completes it reboot process, connect your network device to the
modulator’s rear panel Ethernet connector.