User's Manual Part 1

CL1TC-4 400W DVB-H Transmitter Introduction
Product Manual, Rev. 1 1
1. Introduction
1.1 Manual Overview
T
his manual contains the description of the CL1TC-4 Mobile Multimedia Transmitter. The
manual also describes the installation, setup and operation of the Transmitter.
1.2 Safety
The C
L1TC-4 Transmitter systems manufactured by UB-Axcera are designed to be easy to
use and repair while providing protection from electrical and mechanical hazards. Please
review the following warnings and familiarize yourself with the operation and servicing
procedures before working on the transmitter system.
Hazardous Accessibility – UBS-Axcera has made attempts to provide appropriate
connectors, wiring and shields to minimize hazardous accessibility.
Circuit Breakers and Wiring – All circuit breakers and wire are CE rated and are rated for
maximum operating conditions.
Single Point Breaker or Disconnect - The customer should provide a single point breaker
or disconnect at the breaker box for the main AC input connection to the transmitter.
Transmitter Ratings - The transmitter ratings are provided in the text of this manual along
with voltage and current values for the equipment.
Protective Earthing Terminal – A main protective earthing terminal is provided for
equipment required to have protective earthing.
Read All safety Instructions – All of the safety instructions should be read and understood
before operating this equipment.
Retain Manuals – The manuals for the transmitter should be retained at the transmitter site
for future reference. UBS-Axcera provides two manuals for this purpose; one manual can be
left at the office while the other can be kept at the site.
Heed all Notes, Warnings, and Cautions – All of the notes, warnings, and cautions listed
in this safety section and throughout the manual must be followed.
Follow Operating Instructions – All of the operating and use instructions for the
transmitter should be followed.
Cleaning – Unplug or otherwise disconnect all power from the equipment before cleaning.
Do not use liquid or aerosol cleaners. Use only a damp cloth for cleaning.
Ventilation – Openings in the cabinet and module front panels are provided for ventilation.
To ensure the reliable operation of the transmitter, and to protect the unit from overheating,
these openings must not be blocked.
Servicing – Do not attempt to service this product yourself until becoming familiar with the
equipment. If in doubt, refer all servicing questions to qualified UBS-Axcera service
personnel.