User's Manual

Innovator CHV400BTD ATSC Transmitter Web Ethernet
Interface Description
Technical Manual, Rev. 0 44
Figure 11: Typical Ethernet Configuration Menu
For the first time configuration of the system, the following must be completed. A
computer must be placed on the same LAN as the Innovator CHVB Series system,
(NOTE: The Innovator CHVB does not serve DHCP addresses – they must be entered
manually on the setup computer). The setup computer has the following factory default
settings. Refer to Figure 8 for a typical configuration screen. (NOTE: A crossover cable
may be needed if connecting directly from a computer to the Innovator CHVB Series
system).
IP address: 192.168.0.1
Subnet Mask: 255.255.255.000
Default Gateway: 10.0.0.1