Manualshelf

User's Manual

ManualsBrandsUBS-Axcera ManualsElectronics400-Watt High-Band VHF Digital Transmitter
31323334353637383940
Innovator CHV400BTD ATSC Transmitter Initial On Site
Turn On Procedure
Technical Manual, Rev. 0 29
Table 10.6: Downconverter Device Details Screen (BTD/BRD)
NOTE: This screen is only used with an Axciter.
This is the System Device Details Downconverter Main Sub Screen. Push the ENTER
button to access the Device Downconverter submenus or push the DOWN Arrow to go
to the External Amplifier Device Details Screen, if present, or back to the Device
Details Exciter Values screen.
Table 10.6.1: Downconverter RF Input Details Screen (BTD/BRD)
NOTE: This screen is only used with an Axciter.
The Downconverter RF Input details screen indicates that an RF input is present
to the downconverter and the level of the input.
This is the final Device Details Main Sub Menu. Push the LEFT Arrow twice to
go back the Main System Details Screen. Then push the DOWN Arrow to
access the System Set Up Main Menu.
Table 10.7: External Amplifier Device Details Screen (BTD/BRD)
This is the Transmitter Device Details External Amplifier Main Sub Screen. This is the
final Device Details Main Sub Menu. Push the ENTER button to access the Device
External Amplifier #1. Push the LEFT Arrow to go back the Main Device Details
Screen. Then push the DOWN Arrow to access the Transmitter Set Up Main Menu.
NOTE: Shown below are the External Amplifier #1 Details Screens. The
External Amplifier #2, #3 or #4 Details Screens are presented in the same
order if they are present in the system.
Table 10.7.1: External Amplifier #1 Forward Power Details Screen (BTD/BRD)
Indicates Output Power for external amplifier #1. NOTE: See the final test
data sheet for the typical value.
Table 10.7.2: External Amplifier #1 Reflected Power Details Screen (BTD/BRD)
Indicates Reflected Power for external amplifier #1. NOTE: See the final test
data sheet for the typical value.
Table 10.7.3: External Amplifier #1 I1-A1 Current Details Screen (BTD/BRD)
Indicates Current of the A1 device in the external amplifier #1. NOTE: See the
final test data sheet for the typical current value.