System Description

835A 4 kW, 5 kW or 6 kW UHF Transmitter Table of Contents
- Page 2 of 2 -
Your Transmitter contains either the Single Phase or the Three Phase AC Distribution Assembly. Choose the correct
one below.
9. AC Distribution Assembly, Single Phase, One in each Amplifier Array.........................................................1278-1200
A. Drawings:
1. Interconnect ...................................................................................................................................1278-8200
OR:
AC Distribution Assembly, Three Phase, One in each Amplifier Array..........................................................1278-1100
A. Drawings:
1. Interconnect ...................................................................................................................................1278-8100
Your Transmitter contains the Low Band, Mid Band or High Band UHF Amplifier Trays. Choose the correct one
below.
10. UHF Amplifier Tray (Low Band, Mid Band or High Band):..................................... 1294-1112/1294-1113/1294-1114
A. Drawings:
1. Block Diagram...............................................................................................................................1281-3100
2. Interconnect ...................................................................................................................................1281-8100
11. Subassemblies:
Refer to the Subassembly Section of the Instruction Manual for the Schematics of the Boards and Modules, which
make up the 835A. The Subassembly Drawing List, which is a list of the drawings in the order they appear in the
Section, is located in the front of the Subassembly Section.
12. Maintenance
This section contains information on the operation and maintenance of the 835A.