Instruction Manual

6X Series Liquid-Cooled Transmitter Chapter 1, Introduction
Instruction Manual, Rev. 0 1-4
familiarize yourself with the operation and servicing procedures before working on the
product.
Hazardous Accessibility – Axcera has made attempts to provide appropriate
connectors, wiring and shields to minimize hazardous accessibility.
Circuit Breakers and Wiring – All circuit breakers and wire are UL and CE certified and
are rated for maximum operating conditions.
Single Point Breaker or Disconnect - The customer should provide a single point
breaker or disconnect at the breaker box for the main AC input connection to the
transmitter.
Transmitter Ratings - The transmitter ratings are provided in the text of this manual
along with voltage and current values for the equipment.
Protective Earthing Terminal – A main protective earthing terminal is provided for
equipment required to have protective earthing.
Read All Instructions – All of the operating and safety instructions should be read and
understood before operating this equipment.
Retain Manuals – The manuals for the equipment should be retained at the site in which
the equipment is operating for future reference. We provide two manuals for this purpose;
one manual can be left at the office while the other manual can be kept at the site.
Heed all Notes, Warnings, and Cautions – All of the notes, warnings, and cautions
listed in this safety section and throughout the manual must be followed.
Follow Instructions – All of the operating and use instructions for the product should be
followed.
Cleaning – Unplug or otherwise disconnect all power from the equipment before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Ventilation – Openings in the cabinet and module front panels are provided for
ventilation. To ensure the reliable operation of the transmitter, and to protect the unit
from overheating, these openings must not be blocked.
Servicing – Do not attempt to service this product yourself until becoming familiar with
the equipment. If in doubt, refer all servicing questions to qualified Axcera service
personnel.
Replacement Parts – When replacement parts are needed, be sure that the parts have
the same functional and performance characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards. Please contact the
Axcera Technical Service Department if you have any questions regarding service or
replacement parts.
1.4 Contact Information
The Axcera Field Service Department can be contacted by phone at 1-724-873-8100 or
by fax at 1-724-873-8105.