User's Manual

Ubisense – Ultra-wideband Location System – Ubisensor V2.0
Troubleshooting
If you believe that a Ubisensor is not functioning correctly, and the Ubisense location system
management tools are not able to diagnose the problem, it is likely that the Ubisensor is not
communicating with the rest of the location system for some reason. Check the following:
• The Ubisensor is connected to a power supply, and the supply is switched on.
• The networking cable is fully plugged in at both ends.
• Your local network port is connected to the rest of your network.
• The link light corresponding to the Ubisensor network connection is illuminated on the
nearest upstream switch.
If you are still unable to determine the cause of the problem, contact your system installer or
Ubisense.