User's Manual

© 2010 - 2015 Persistent Systems, LLC – All Rights Reserved 97
WEB MANAGEMENT INTERFACE REFERENCE
CHANNEL DEFINITIONS (ADVANCED)
The Wave Relay
®
Network has 16 channels numbered 0 through 15. Channel 0 is
the Flash Override Channel and has priority over channels 1-15. Channels 1-15
are normal audio channels. Each channel is defined by a Multicast Address and a
Multicast Port. After Channel Definition settings have been configured, click the
“Set All” button.
PTT SETTINGS
MENU ITEM MENU ITEM DESCRIPTION
Enable Push-to-
Talk
Enables or disables the PTT subsystem to allow push-to-talk communi-
cation among voice-equipped devices
Volume Defines the default earpiece volume for headsets - Valid values are 0
through 100. Optimal values vary with headset manufacturer.
Microphone Level Defines the default microphone level for headsets - Valid values are 0
through 100. Optimal values vary with headset manufacturer.
Transmit Mode (advanced)
Transmit on
keypress
Audio is transmitted only when the PTT button is pressed on the
headset.
Transmit
continuously
Audio is continuously transmitted. Other nodes may monitor the
channel only. Selected Channel audio transmissions will interrupt
monitored continuously transmitted audio.
Tones on Transmit
(advanced)
Enables or disables an audible checktone (either Beeps or Verbal) at
the beginning of each transmitted message
Tones on Receive
(advanced)
Enables or disables an audible checktone (either Beeps or Verbal) at
the beginning of each received message
Advanced Features (advanced)
Silynx PTT Head-
set
Enables the serial port on the node (Silynx PTT Headsets require this
setting be enabled)
Microphone
Voltage
Enables +5V power supply voltage on the center pin of the 6-pin head-
set connector (required for some headsets)