User's Manual

© 2010 - 2015 Persistent Systems, LLC – All Rights Reserved 95
WEB MANAGEMENT INTERFACE REFERENCE
POSITION SETTINGS (ADVANCED)
MENU ITEM MENU ITEM DESCRIPTION
Update Interval Controls how often nodes report information back to visualiziation server
with visualization enabled - A smaller value will result in smoother movement
of mobile nodes in Google
™
Earth. A shorter update interval uses more
bandwidth.
ESD UDP Port Defines the port number to receive position updates via an external ESD
feed
External Up-
date UDP Port
Defines the port number to receive position updates via the external Wave
Relay
®
‘wr-update-gps’ command
CoT UDP Port Defines the port number to receive position updates via external CoT feed
CDF UDP Port Defines the port number to receive position updates via an external CDF
feed
WAVE RELAY
®
SA (GOOGLE
™
EARTH
NETWORK VISUALIZATION) SETTINGS
MENU ITEM MENU ITEM DESCRIPTION
Report to
Visualization
Server
Enable or disables network visualization for all nodes set to use the Network
Default (typically the whole network) - Visualization is also used by the Tracking
Antenna system and should be enabled on nodes that you wish to be able to
track.
MTU (advanced) Defines the maximum transmissible unit size for the IP net-
work - WRoIP protocol packets sent over the IP network will
be limited to this MTU. All nodes that communicate over
the IP network should be set to the same value.
Multicast Address (advanced) Defines the multicast IP address used by the WRoIP protocol
- The next higher IP multicast address will also be used by the
WRoIP protocol. For example, if 239.255.90.67 is set as the
multicast address, both 239.255.90.67 and 239.255.90.68 will
be used.
UDP Port (advanced) Defines the UDP port used by WRoIP protocol packets