User's Manual

VALID AMPLIFIER SETTINGS ARE:

• WR-AMP-0900 900 MHz Ampliﬁer

• WR-AMP-1370 1.3 GHz Ampliﬁer

• WR-AMP-2400 2.3 - 2.5 GHz Ampliﬁer

When the Ampliﬁer Conﬁguration page for a QAMP device is accessed from the

Web Management Interface, the sections for some radios may display the message

“Ampliﬁer Speciﬁed by Pelican Case.” The ampliﬁer settings for these radios have

already been conﬁgured.

WARNING: WAVE RELAY

AMPLIFIERS REQUIRE REGULATED 28V

DC POWER SUPPLY (DEVIATIONS WILL CAUSE DEGRADATION IN

PERFORMANCE).

WEB MANAGEMENT INTERFACE REFERENCE