User's Manual

WEB MANAGEMENT INTERFACE REFERENCE

Any Wave Relay

device (MPU4, MPU3 Single, MPU3 Dual, and Quad Radio Router)

may be conﬁgured for use with an ampliﬁer. To access Ampliﬁer Conﬁguration

settings, select the “Node Conﬁguration” tab, then click the “Ampliﬁer

Conﬁguration” button. The page will display separate sections for each radio so that

the ampliﬁer settings for each radio may be conﬁgured separately.

Depending on the radios installed in the node, several different options will appear.

If the radio installed in the node does not support the use of an ampliﬁer, the

section on the page corresponding to that radio will display the message “Ampliﬁer

not supported on this Radio.”

If the radio installed in the node does support the use of an ampliﬁer, a drop-down

menu titled “Ampliﬁer Setting” will appear. On the drop-down menu, select the

ampliﬁer setting that matches the ampliﬁer being used with the radio.

AMPLIFIER CONFIGURATION