User's Manual

WEB MANAGEMENT INTERFACE REFERENCE

VIRTUAL-TO-SERIAL MODE

CONFIRMING SERIAL CONNECTIVITY

Once you have conﬁgured the server and client as described above, the network

connection status is displayed on the “Current Status” line. Statistics are displayed for

transmitted and received bytes to/from the attached serial device, which can be used

to debug the connection to your serial hardware. For example, if the “tx” byte count

increases but the “rx” byte count remains zero, bytes are being sent out on the Wave

Relay

serial port but no reply is being received (possibly due to reversed transmit

and receive wires in your cable). To update the status and statistics, click the “Refresh”

button.