User's Manual

WEB MANAGEMENT INTERFACE REFERENCE

PUSH-TO-TALK (PTT)

Push-to-Talk (PTT) voice is supported on all Wave Relay

nodes. By default, Wave

Relay

supports single-channel PTT voice on a speciﬁed multicast IP address and port.

You can “switch channels” by specifying an alternate IP address or port. Users can talk

or listen (but cannot do both simultaneously). Transmissions from an individual user

are broadcast to all other users on the network. Only one person can talk at a time.

If a user tries to talk when another user is transmitting, a busy tone will be heard.

To conﬁgure Push-to-Talk settings, click “Node Conﬁguration” > “PTT

Conﬁguration.”