User's Manual

© 2010 - 2015 Persistent Systems, LLC – All Rights Reserved64
The Web Management Interface contains a “Reset to Factory Configuration” feature
to remove all custom configuration and restore the node to its factory settings.
1. Click “Node Configuration” > “Config Management.” Scroll to the bottom
of the page. Resetting the node to its factory settings will remove all custom
configuration and will reset the IP address to 10.4.1.254.
2. To retain the node name and IP address after the reset, ensure that the box
labelled “Keep node name and IP address” is checked. The node’s Crypto Key
will NOT be zeroized. For instructions on how to zeroize the Crypto Key from
the Security Configuration page, refer to the “Security” section.
3. When you are ready to remove all custom configuration and restore the node to
its factory settings, click the “Reset” button.
WEB MANAGEMENT INTERFACE REFERENCE
RESET TO FACTORY CONFIGURATION