User's Manual

© 2010 - 2015 Persistent Systems, LLC – All Rights Reserved60
WEB MANAGEMENT INTERFACE REFERENCE
WAVE RELAY
®
SA (GOOGLE
™
EARTH NETWORK VISUALIZATION)
MENU
ITEM
MENU ITEM DESCRIPTION
Report to
Server
Sending visualization updates can be individually enabled or disabled on each
node. Setting “Network Default,” allows visualization to be turned on and off
for the entire network at once via the Network Default configuration. Note
that the selected server IP address is displayed here but is configured as part
of the Network Default configuration. Visualization is also used by the Tracking
Antenna system and should be enabled on nodes that you wish to track.
Icon The user may select an icon that will be used to identify the node in Google
™
Earth.
MENU ITEM MENU ITEM DESCRIPTION
Send Position Enables or disables transmission of CoT packets to server
Server IP Defines the IP address of the CoT server - This IP address can be a unicast
or multicast address
Server Port Defines the UDP port of the CoT server
UID Defines the contents of the CoT “uid” attribute
Type Defines the contents of the CoT “type” attribute
Video Address Defines the contents of the CoT “Video Address” attribute
CURSOR ON TARGET (COT) SETTINGS
This feature enables transmission of local position-
ing information to a CoT server on the network.
This feature is not available on all firmware ver-
sions.
SIMPLE SA PACKET GENERATOR (SSPG) (ADVANCED)
These settings exist for backwards compatability with an outdated protocol. See
earlier versions of the manual for more information.