User's Manual

© 2010 - 2015 Persistent Systems, LLC – All Rights Reserved54
WEB MANAGEMENT INTERFACE REFERENCE
VLAN Priority
(advanced)
Specifies the 802.11 priority of the VLAN tag added to untagged
frames received by this port
VLAN Trunking
(advanced)
Controls the filtering of VLAN tagged frames that do NOT match this
port’s VLAN ID - Trunking enabled: ALL non-matching VLAN tagged
frames are passed (no filtering). Trunking disabled: all non-matching
VLAN tagged frames are blocked (filtered).
IP Mcast/Bcast Limit
(advanced)
Defines the maximum bandwidth allowed for IP multicast or broadcast
network traffic received on the given interface and retransmitted onto
the Wave Relay
®
network - Traffic in excess of this limit will be dropped.
Units are megabits/sec (Mbps). To disable the limit, set to zero.
Routing Metric
(advanced)
Defines link capacity for the routing protocol - A value lower than
the 100 Mbps default should be used when nodes are connected via
non-switched Ethernet (e.g. a third-party point-to-point wireless link).
The metric allows the routing protocol to make an intelligent decision
whether it is better to route over this Ethernet port or use a faster
alternate route.
USB ETHERNET (ADVANCED)
MENU ITEM MENU ITEM DESCRIPTION
USB Ethernet Charging
Power
Controls how an EUD connected via a USB Ethernet cable
receives a charge from the node - Should be set to “Always
On” for the Samsung Note/Note II/Note III, Motorola EUDs,
and Nexus 7 and “Carrier Sense” for the Samsung Galaxy SII
9100G.