User's Manual

For your computer to be able to communicate with the Wave Relay

, it must have

an IP address that is in the same IP subnet mask as the Wave Relay

’s IP address.

A subnet mask of 255.255.255.0 means that the computer can communicate with

another device that has an IP address matching the ﬁrst three numbers of its own IP

address.

No Default Gateway or DNS server conﬁguration is required; however they can be

conﬁgured if necessary. Most computers are capable of having more then one IP

address conﬁgured on a single Ethernet adapter. It is recommended that you add all

three addresses to your wired Ethernet adapter so that you can easily manage your

network.

CONFIGURING YOUR COMPUTER’S IP ADDRESS

WINDOWS:

Start > Network (Right Click) >

Properties

Change Adapter Settings (Windows Vista

/ 7 only)

Local Area Connection (Right Click) >

Properties

Select Internet Protocol Version 4 (TCP/

IPv4)

Click Properties

Select Use the following IP Address

Click Advanced…

Click Add…

Enter IP Address and Subnet mask

Click Add and repeat for all IP

Addresses

LINUX:

[sudo] ifconﬁg eth0 10.4.1.10/24

[sudo] ip addr add 10.3.1.10/24 dev

eth0

[sudo] ip addr add 10.3.2.10/24 dev

eth0

WEB MANAGEMENT OVERVIEW