User's Manual
© 2010 - 2015 Persistent Systems, LLC – All Rights Reserved22
NODE CONNECTIVITY INFORMATION
Default Management Password
Ethernet 1 Factory Setup IP
Ethernet 2 Factory Setup IP
Password
10.3.1.254
10.3.2.254
•Factory Setup IP addresses are always accessible when directly connected to the radio. Use
Factory IPs any time you do not remember the management IP address of the radio.
•To connect to the Factory IP address, the management computer must be on the correct
IP subnet and wired to the correct Ethernet port on the node.
MANAGEMENT COMPUTER SETTINGS
IP Address
Subnet Mask
Default Gateway / Router
10.3.1.10
255.255.255.0
10.3.1.1
•To connect to the node using Ethernet 1, open a web browser and connect to
http://10.3.1.254.
•Each time you connect a new device, you may need to accept a security certificate before
you can enter the Web Management Interface.
•See next page for information on setting up the management computer.
ACCESSING THE WEB MANAGEMENT INTERFACE
WEB MANAGEMENT OVERVIEW