User's Manual

19
Accessing the mPort Configuration Portal
Wireless Settings To use the mPort on a Wi-Fi network,
configure the Wireless Settings:
a. Click Scan for a list of available SSIDs. Select the
appropriate SSID or type in the name manually in
the SSID field.
b. Select the appropriate Security and Authentication
settings for your network.
c. Enter your network key.
After you’ve entered the necessary settings, click Change.
You will be asked to apply the changes; click Apply.
4. Log in to the mFi Controller.
5. The mPort appears with the mPort icon in the left
panel under the Drag on to Map heading. Once you’ve
customized your map, you can position the mPort in
the appropriate location.
For details on connecting mSensors
™
to the mPort, refer to
the Quick Start Guide included with your mSensor.
For additional details on the mFi Controller software, refer
to the User Guide on our website at www.ubnt.com/mfi