micro 1080p Wireless IP Security Camera with Infrared Model: UVC-G3-MICRO
Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® Video Camera G3 Micro. This Quick Start Guide is designed to guide you through installation and also includes warranty terms. Package Contents UVC-G3-MICRO Camera 802.3af Instant PoE Adapter Wall Mounts (Qty. 2) Power Adapter Instant PoE Cover Instant PoE Mount Table Stand Angle Mount Adhesives (Qty. 2) micro 1080p Day/Night IP Security Camera with Infrared Model: UVC-G3-MICRO Screws and Anchors (Qty. 4) Cable Clips (Qty.
Before You Begin The UVC G3 Micro is designed to work with the UniFi® Video (v3.8 or above) controller software. The software may be hosted on either of the following: • The Ubiquiti Networks® UniFi NVR appliance • A Linux/Windows computer Note: The latest UniFi Video software is available for free download at: www.ubnt.com/download/unifivideo The UVC G3 Micro can be powered by either of the following methods: • Using the included Instant PoE Adapter connected to an 802.
Hardware Overview LED Reset Magnetic Base LED The LED will flash blue during bootup. When the camera is ready to connect to the Wi-Fi network, the LED pattern will flash two times accompanied by two beep tones. Once connected to the network, the LED will glow a breathing pattern.
Installation The UVC G3 Micro can be mounted in four ways: • • • Magnetic For temporary installation Adhesive For fast, permanent installation Screws For secure installation • Table For installing on a flat surface such as a table or shelf Magnetic Mount 1. Remove the Wall Mount from the Magnetic Base. Wall Mount 2. Attach the Power Adapter or Instant PoE Adapter to the Magnetic Base.
3. Attach the camera and Magnetic Base directly to a metal fixture. Go to Connecting the Power. Adhesive Mount 1. If the Power Adapter cord or PoE Adapter Cord feeds through the wall, drill or cut a hole and feed the cord through it. 2. Remove the tab from the notch and attach the Wall Mount using the adhesive side.
3. Attach the Power Adapter or Instant PoE Adapter to the Magnetic Base. 4. Attach the camera and Magnetic Base to the mount. If the power cord feeds through the Wall Mount, rotate the Magnetic Base to align the cord with the notch on the Wall Mount. Go to Connecting the Power.
Screw Mount 1. If the circular connector on the Power Adapter or Instant PoE Adapter needs to connect through the wall, drill or cut a hole out and feed the power connector through it. Wall Mount Angle Mount 2. Use the Screws and Screw Anchors to fasten the Wall Mount or the Angle Mount.
3. Attach the Power Adapter to the Magnetic Base. 4. Attach the camera and Magnetic Base to the mount. If the power cord feeds through the Wall Mount, rotate the Magnetic Base so the cord aligns with the notch on the Wall Mount. Go to Connecting the Power.
Table Mount 1. Feed the circular power connector (on the Power Adapter or Instant PoE Adapter) through the hole in the Table Stand. 2. Attach the circular power connector to the Magnetic Base of the camera. 3. Attach the Magnetic Base of the camera to the Table Stand by pressing it over the two notches and sliding it down.
Connecting the Power Follow the instructions for your method of powering the camera: Power Adapter or Instant PoE Adapter. Power Adapter Plug the Power Adapter into an outlet. Note: Use the included Cable Clips to hold the power cord in place. Remove the paper backing on each clip to expose the adhesive and affix to a desired location. Instant PoE Adapter 1. Install the Instant PoE Mount on a wall using the included screw kit.
2. Attach the circular power connector to the Magnetic Base of the camera. 3. Attach the Magnetic Base of the camera to the Instant PoE Mount by pressing it over the two notches and sliding it down. 4. Place the Instant PoE Cover over the Magnetic Base and onto the Instant PoE Wall Mount until it snaps into place. Then mount the camera to the Magnetic Base.
5. Connect the Ethernet cable from an 802.3af PoE switch to the PoE In port of the Instant PoE Adapter. Note: Use the included Cable Clips to hold the power cord in place. Remove the paper backing on each clip to expose the adhesive and affix to a desired location. Setting Up the UVC G3 Micro Ensure you are running the latest version of UniFi Video, v3.8 or above on the UniFi NVR or computer-based system.
Specifications UVC-G3-Micro Dimensions Body Base Weight Body Base Enclosure Characteristics Mounting Options Networking Interface Lens Sensor View Angle LDC Off LDC On Night Mode Video Compression Resolution Max. Frame Rate Microphone Speaker Power Supply Supported Voltage Range Max. Power Consumption IR LEDs On IR LEDs Off Operating Temperature Operating Humidity Certifications Ø 51.38 x 41.97 mm (2.02 x 1.65") Ø 36.0 x 17.3 mm (1.41 x 0.68”) 65 g (2.29 oz) 31 g (1.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Returns No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal.
Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This radio transmitter FCC ID: SWX-UVCG3M has been approved by FCC. Industry Canada CAN ICES-3(B)/NMB-3(B) This Class B digital apparatus complies with Canadian CAN ICES-003.
RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. Les antennes utilisées pour ce transmetteur doivent être installé en considérant une distance de séparation de toute personnes d’au moins 20 cm et ne doivent pas être localisé ou utilisé en conflit avec tout autre antenne ou transmetteur.
RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity български [Bulgarian] С настоящото UBIQUITI NETWORKS декларира, че този тип радиосъоръжение това устройство UVC-G3-MICRO е в съответствие с Директива 2014/53/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: www.ubnt.com/compliance Hrvatski [Croatian] UBIQUITI NETWORKS ovime izjavljuje da je radijska oprema tipa ovaj UVC-G3-MICRO uređaj u skladu s Direktivom 2014/53/EU.
Lietuvių kalba [Lithuanian] Aš, UBIQUITI NETWORKS, patvirtinu, kad radijo įrenginių tipas šis UVC-G3-MICRO įrenginys atitinka Direktyvą 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas šiuo interneto adresu: www.ubnt.com/compliance Malti [Maltese] B’dan, UBIQUITI NETWORKS, niddikjara li dan it-tip ta’ tagħmir tar-radju dan il-mezz UVC-G3-MICRO huwa konformi mad-Direttiva 2014/53/UE. Id-dikjarazzjoni tal-konformità tista’ tiġi kkonsultata minn www.ubnt.
