Cable Accessory Model: UVC-Pro-C
Introduction Thank you for purchasing the Ubiquiti Networks™ UniFi® Video Camera PRO Cable Accessory, model UVC-Pro-C. The accessory is designed for use with the UVC PRO. In addition to the convenient Reset button, the UVC PRO Cable Accessory provides Ethernet, Audio In/Out, and mFi RJ45 connectors. This Quick Start Guide is designed to guide you through the installation of the UVC PRO Cable Accessory, and also includes the warranty terms.
Cable Overview Audio In/Out Reset Button UVC PRO Coupling mFi RJ45 Port PoE Port Connection Audio In/Out Description Features two-channel audio input and one-channel audio output to a speaker. Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the UVC PRO is already powered on. mFi RJ45 Port Connects to a mFi mPort using a standard RJ45 cable, making the UVC PRO a configurable digital sensor in an mFi system.
Cable Installation 1. Install the waterproofing O-Ring inside the waterproof gland of the UVC PRO cable. 2. Align the RJ45 connector of the UVC PRO Coupling with the Ethernet port of the waterproof gland. Ensure the RJ45 pin connections are facing each other.
3. Press the UVC PRO Coupling into the waterproof gland and ensure the alignment notches are lined up. 4. Secure the connection by turning the coupling nut clockwise. Do not use any tools. Only hand-tighten the coupling nut.
Audio In/Out Connection The Audio In/Out Connection provides one-channel output and two-channel (stereo) input. Use the included terminal block to connect your audio wires. The audio wires should be 20 - 28 AWG, solid single-core wires. Speaker 8Ω, 1W 2 Channel Line-In Audio Wiring Diagram 1. Insert a stripped wire into the corresponding hole of the terminal block. 2. Slightly pull on the wire to ensure it is locked into the terminal.
mFi Connection Connect to an mFi mPort to integrate the UVC PRO into an mFi system. The UVC PRO can be used as a digital sensor for machine-to-machine automation, sensoring, and monitoring. 1. Connect an Ethernet cable to the yellow mFi RJ45 port. 2. Connect the other end of the cable to the mFi RJ45 port of an mPort.
3. Launch the mFi Controller. 4. Click the Settings icon of the mPort. 5. In the Configuration tab of the mPort Settings window, click the Add icon and select Ubiquiti UVC PRO from the device type drop-down list. Note: Ensure the latest version of mFi Controller is installed. If Ubiquiti UVC PRO is not listed in the device type drop‑down list, use Output 12v as the device type. For more mFi integration details, visit the mFi Knowledge Base at http://community.ubnt.
Connecting Power over Ethernet 1. Connect an Ethernet cable to the gray PoE port. 2. Connect the other end of the Ethernet cable to one of the following: • PoE Adapter Connect to the Ethernet port labeled POE on the UVC PRO PoE Adapter. • TOUGHSwitch PRO or Carrier Connect to a port with 48V PoE enabled and skip steps 3 and 4.
3. Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the PoE Adapter. 4. Connect the other end of the power cord to a power outlet. The Power LED should light up on the UVC PRO.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Returns No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal.
Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Additional UVP-Pro Accessories UVC-Pro-M Large Pole Mount Accessory • Industrial-Grade Metal Mount • Fits up to160 mm Diameter Poles • Mounts One or Two Cameras Avaiable UniFi Video Products UVC-NVR Stand-Alone UniFi Video Appliance • • • • UniFi Video Controller Network Video Recorder 500 GB Hard Drive Low Power Consumption UVC Indoor/Outdoor Camera • 720p HD, 30 FPS • Day and Night with Infrared LEDs • Wall, Ceiling, or Pole Mount UVC-DOME Indoor, Wide-Angle Camera • 720p HD, 30 FPS • Day and Nigh
www.ubnt.com ©2014 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, ToughCable, ToughSwitch, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
