User Manual

3
Datasheet
Accessories
Dedicated Hardware NVR with
UniFi Video software pre-installed
The UniFi NVR is a plug-and-play NVR appliance
with low power consumption. The UniFi Video
software is pre-installed for quick and easy
deployment. No additional software is required.
Plug it into the network, go through the
conguration wizard, and it is set up and ready
to go.
The UniFi NVR has a built-in 500 GB hard drive.
This equates to approximately 1200recording
hours at 480p resolution or 400recording
hours at 720p resolution (numbers can vary
depending on the frame rate).
Large Pole-Mount Accessory for
UniFi Video Camera PRO
The UniFi Video Camera PRO Large Pole Mount ,
model UVC-Pro-M, accommodates larger
poles up to 160 mm wide and mounts one
or two UniFi Video Camera PRO devices on a
singlepole.
• Industrial-Grade Metal Mount
• Fits up to 160 mm Diameter Poles
• Mounts One or Two Cameras
UniFi Video Camera PRO Cable
Accessory
The UniFi Video CameraPRO Cable Accessory,
model UVC-Pro-C, is designed for use with
the UVC PRO. In addition to the convenient
Reset button, the UVC PRO Cable Accessory
provides Ethernet, Audio In/Out, and mFi RJ45
connectors.
Video Camera