Video Camera Network Video Recorder with 500 GB Hard Drive Model: UVC-NVR
Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® NVR. This Quick Start Guide is designed to guide you through installation and also includes the warranty terms. The UniFi Video User Guide is available for download at downloads.ubnt.com/unifivideo Package Contents UniFi NVR Vertical Support Stand Power Adapter (19V, 3.
Hardware Overview Front Panel Power Button Disabled - Not Used Interface Reset Button Description Powers ON or OFF the UniFi NVR. Power Button Reset Button • Power ON Press the Power button to turn on the UniFi NVR and start all services. • Soft Power OFF Briefly press the Power button to stop all services and safely shut down the UniFi NVR. • Hard Power OFF Press and hold the Power button until the LEDs turn off to immediately turn off the UniFi NVR. Resets the UniFi NVR to factory defaults.
Back Panel 10/100/1000 Ethernet Disabled - Not Used Power Not Used Interface Description 10/100/100 Ethernet Connect the Ethernet port to the same LAN hosting your UniFi Video Cameras Power Connect the Power Adapter to the Power port. Note: Onboard video and USB controllers are disabled and not used.
Hardware Installation The small form factor of the UniFi NVR allows it to be placed vertically or horizontally on any flat surface. Vertical Placement Place the UniFi NVR in the narrow opening of the Vertical Support Stand.
Connecting the UniFi NVR 1. Connect an Ethernet cable from your LAN to the Ethernet port. 2. Connect the Power Adapter to the Power port.
3. Connect the Power Cord to the Power Adapter. Connect the other end of the Power Cord to a power outlet.
Accessing the UniFi NVR The UniFi Video configuration portal is accessed by using a web browser. There are two ways to access the portal: • Ubiquiti Device Discovery Tool For users with a DHCP‑enabled LAN and using the Chrome browser. • Direct Connection to UniFi NVR Configure the UniFi NVR by connecting it directly to your computer via Ethernet. Ubiquiti Device Discovery Tool The Ubiquiti Device Discovery Tool is available as a stand‑alone application and as a Chrome extension (Chrome browser required).
5. The UniFi Video configuration portal will appear in a new browser window. 6. Skip to Configuring UniFi Video.
Direct Connection to the UniFi NVR 1. Connect the Ethernet cable from the UniFi NVR directly to your computer. 2. Press the Power button on the UniFi NVR, and wait about one minute for it to fully boot up and start all services. 3. Configure the Ethernet adapter on your computer with a static IP address on the 192.168.1.x subnet. 4. Launch a web browser and type http:// 192.168.1.30 in the address field. Press enter (PC) or return (Mac). 5.
Configuring UniFi Video 1. Click the UniFi Video image in the UniFi Video configuration portal to log in. Note: Advanced configuration options, such as network settings, may be accessed by clicking the configuration icon. The default username and password is ubnt. 2. The UniFi Video Setup Wizard will appear. Click I accept this license agreement to accept the terms and continue.
3. Enter a system name for your NVR, select your preferred language, and specify your time zone. Click Next. 4. Enter an administrator email address and password to use when accessing the UniFi Video Controller Interface. Confirm your password. Click Next.
5. Review your settings. Click Finish to save your settings, or click Back to make changes. When finished, the UniFi Video Controller Interface will launch. 6. The UniFi Video login screen will appear. Enter the email address and password that you created, and click Submit. For detailed information on using the UniFi Video software, download the UniFi Video User Guide at: documentation.ubnt.
Specifications UniFi NVR Dimensions 135 x 190 x 25 mm(5.31 x 7.48 x 0.98") Weight 483 g (17 oz) Processor Intel D2550 Memory 4 GB Hard Drive Capacity Networking Interface 500 GB (1) 10/100/1000 Ethernet Port Power Supply 65W, 19V, 3.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PUR
Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you.
Industry Canada CAN ICES-3(B)/NMB-3(B) This Class B digital apparatus complies with Canadian CAN ICES-3(B). This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) Cet appareil numérique de la classe B est confrome à la norme NMB-3(B) Canada.
RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity Česky [Czech] UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI NETWORKS zařízení, je ve shod se základními požadavky a dalšími příslušnými ustanoveními směrnic 2014/30/EU, 2014/35/EU. Dansk [Danish] Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI NETWORKS enhed, er i overensstemmelse med de væsentlige krav og øvrige relevante krav i direktiver 2014/30/EU, 2014/35/EU.
UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS Lietuviškai [Lithuanian] įrenginys atitinka esminius reikalavimus ir kitas 2014/30/ES, 2014/35/ES Direktyvų nuostatas. Malti [Maltese] Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz UBIQUITI NETWORKS huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħrajn ta ‘Direttivi 2014/30/UE, 2014/35/UE.
www.ubnt.com ©2013-2016 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
