Owners manual

4
Chapter 1: Installation UniFi Video User Guide
Ubiquiti Networks, Inc.
11. A list of cameras will be displayed, allowing you to
select the cameras to be controlled by the NVR.
12. If you do not want to add cameras at this time:
a. Click Skip this Step.
b. Go to step 16.
13. To add the camera(s):
a. Select each camera you want to add by clicking the
check box next to it in the list.
b. Click Add Selected Cameras.
14. Wait while the firmware for the selected camera(s) is
updated.
15. When the firmware update is complete, “Setup
Complete” will be displayed. Click Go to Live View:
16. The UniFi Video Management software opens. If
you added cameras, the Live View page is displayed;
otherwise, the Cameras page is displayed.
Setup is complete.
Launching UniFi Video
After you have set up UniFi Video on your NVR, launch
UniFi Video from the cloud as follows:
1. Open the Chrome browser application on a computer
with an Internet connection.
2. Enter https://video.ubnt.com in your browser’s
address field. Press Enter (PC) or Return (Mac).
3. Enter the Username and Password for your Ubiquiti
account. Click Sign In.
4. UniFi Video will connect to your NVR and open.
Note: You can also launch UniFi Video from a
computer on the same network as the NVR:
1. Open the Chrome browser application on a
computer on the same network as the NVR.
2. Enter https://<NVR_address> in your browser’s
address field, where NVR_address is the NVR’s IP
address. Press Enter (PC) or Return (Mac).
3. Enter the Username and Password for your admin
account on the NVR. Click Sign In.
4. The UniFi Video application will open.
Proceed to the appropriate chapter for information on
using the UniFi Video Management software:
• “Cameras” on page 9
• “Map” on page 15
• “Live View” on page 17
• “Timeline” on page 19
• “Recordings” on page 23
• “Alerts” on page 25
• “Users” on page 27
• “Settings” on page 31