Owners manual
52
Appendix B: Standalone Mode UniFi Video User Guide
Ubiquiti Networks, Inc.
Configuring the Camera
When the camera is in standalone mode, the top right
corner of the live video feed display has two icons:
• Click this icon to toggle the live video screen
between normal size and full-screen display.
• Click this icon to display the drop-down menu that
allows you to perform the following functions on the
camera:
• Brightness Adjust the brightness of
the live view image by dragging the slider
control to the left or right.
• Contrast Adjust the contrast of the live
view image by dragging the slider control
to the left or right.
• Hue Adjust the hue of the live view
image by dragging the slider control to the
left or right.
• Saturation Adjust the saturation of
the live view image by dragging the slider
control to the left or right.
• Denoise Adjust the noise level of the
live view image by dragging the slider
control to the left or right.
• Sharpness Adjust the sharpness of
the live view image by dragging the slider
control to the left or right.
• WDR Adjust the WDR (Wide Dynamic
Range) sensitivity of the live view image
by dragging the slider control to the left or
right. WDR helps create better image and
video detail in frames that contain both
light and dark areas that would otherwise
be over- or underexposed.
• AE Mode Choose AE (Auto Exposure)
mode for the live view images by selecting
Normal, Anti-Flicker for 60Hz light, or
Anti-Flicker for 50 Hz light from the drop-
down menu. The default is Normal.
• Flip Reverse the image vertically (flip upside down)
by selecting Flip from the drop-down menu, or restore
the normal view by selecting Normal from the drop-
down menu. The default is Normal.
• Mirror Reverse the image horizontally (mirror
image) by selecting Mirror from the drop-down menu,
or restore the normal view by selecting Normal from the
drop-down menu. The default is Normal.
• IR Mode The infrared filter can be changed for the
live view image by selecting On or Off from the drop-
down menu. The default setting is Auto.
Standalone Mode from UniFi Video
You can also enter standalone mode on a camera from
within the UniFi Video software.
Entering Standalone Mode
To enter standalone mode on a camera within UniFi Video:
1. On the Cameras tab, click the camera’s IP address in the
Host column.
2. The camera’s login screen wil appear. Enter your
Username and Password. Then click Login.
3. If you want to set up the camera, click Continue and
follow the prompts. Otherwise, click Skip.
4. The camera’s Standalone mode window will appear,
displaying a live video feed and camera information.