Owners manual

49
Appendix B: Standalone ModeUniFi Video User Guide
Ubiquiti Networks, Inc.
Appendix B: Standalone Mode
Standalone mode is used to access a UniFi Video camera
directly using your web browser, and without using the
UniFi Video software. You can use standalone mode to
set up a camera right out of the box, and to view a live
video
feed via RTSP streaming.
Using Standalone Mode
Note: In order to use standalone mode on a UniFi
Video camera, the camera’s firmware must be
updated to version 3.2. To download the latest
firmware for your UniFi Video camera, go to
downloads.ubnt.com/
Follow these instructions to use standalone mode on a
UniFi Video camera:
1. Enter https://<camera_IP> in your browser’s address
field (where camera_IP is the IP address of the camera
you want to access. Press Enter (PC) or Return (Mac).
2. The camera’s login screen will appear. Enter your
Username and Password (ubnt for both if this is the
initial login to the camera). Then click Login.
3. If you want to set up the camera, click Continue and
follow the prompts. Otherwise, click Skip.
4. The camera’s Standalone mode window will appear,
displaying a live video feed and camera information.
Below the live video display, the window has three tabs:
Configure, Network, and System.
Configure Tab
The Configure tab displays basic camera settings and
allows you to configure certain settings. The top section of
the Configure tab provides the following information:
Name Displays the local device name and a thumbnail
image of the camera.