Owners manual
44
Appendix A: Mobile App UniFi Video User Guide
Ubiquiti Networks, Inc.
Icons below the Camera Detail screen provide the
following controls:
Icon Name Function
Pause Tap to pause the live video stream. The icon
changes to the Play icon.
Play Tap to resume the live video stream. The icon
changes to the Pause icon.
Mute Tap to mute the camera’s audio. The icon changes
to the Unmute icon.
Unmute Tap to unmute the camera’s audio. The icon
changes to the Mute icon.
Full-
screen
Tap to toggle the video display between normal
size and full-screen display. You can also pinch to
zoom in and out.
The following control is located above the video screen:
Enhance
(Available only on G3 cameras.) This feature
lets you set a camera’s view to a specific part of its full
field of view. After zooming in (pinch to zoom), tap this
icon and then tap Continue to make the zoomed-in view
persist. To disable the zoomed-in view and restore the
camera’s full field of view, tap the icon again.
Note: When Enhance is selected, the new view will
apply to the following:
• All live video from the camera.
• All recorded video from the camera.
• All motion zones for the camera.
Below the icon bar, the following information is displayed:
Camera Name Displays the name of the camera.
Camera Settings Tap Camera Settings to access camera
settings:
• Motion Alert Sound (Available on UVC-Micro and
UVC-Pro only) Set to On to enable the camera’s motion
alert sound, or set to Off to disable the motion alert
sound.
• Camera LED (Available on UVC-Micro only) Set to On to
enable the camera’s LED, or set to Off to disable the LED.
• Image Settings Tap Image Settings to access the
Image Settings screen.
IP Address Displays the IP address of the camera on the
local network.
Firmware Displays the firmware version installed on the
camera.
Status Displays Connected or Disconnected.
Record Mode Displays the recording mode: Off,
OnMotion, or Always. To change the setting, tap the
icon and select the new setting.
Record Resolution Displays the recording resolution:
High, Medium, or Low. To change the setting, tap the
icon and select the new setting.
Recent Recordings Tap Recent Recordings to open a
Recordings screen that lists recordings for the selected
camera only.
Image Settings
The Image Settings screen lets you change the image
settings for the live feed you are currently viewing. To
access this screen from the Camera Detail screen, tap
Camera Settings and then tap Image Settings.
Use the adjustment slider to modify each image property.
The Image Settings window includes a live preview that
updates as adjustments are made. Swipe the Image
Settings menu horizontally to see additional image
settings. The image settings include the following:
BRIGHTNESS
Brightness Change the image brightness by
moving the slider control left or right, from 0
(darkest) to 100 (brightest).
50
CONTRAST
Contrast Change the image contrast by
moving the slider control left or right, from 0
(least contrast) to 100 (greatest contrast).
50
HUE
Hue Change the image hue by moving the
slider control left or right, from 0 (red end of
spectrum) to 100 (purple end of spectrum).
50