Owners manual
37
Appendix A: Mobile AppUniFi Video User Guide
Ubiquiti Networks, Inc.
Camera Detail
The Camera Detail screen displays a live video feed
from the selected camera, as well as specific details on
the camera, including its name, status, IP address, and
software version.
Icons located just below the Camera Detail screen provide
the following controls:
Icon Name Function
Pause Tap to pause the live video stream. The icon
changes to the Play icon.
Play Tap to resume the live video stream. The icon
changes to the Pause icon.
Enhance (Available only on G3 cameras.) This feature lets
you set a camera’s view to a specific part of its full
field of view. After zooming in (pinch to zoom),
tap this icon and then tap Continue to make the
zoomed-in view persist. To disable the zoomed-in
view and restore the camera’s full field of view,
tap the icon again.
Mute Tap to mute the camera’s audio. The icon changes
to the Unmute icon.
Unmute Tap to unmute the camera’s audio. The icon
changes to the Mute icon.
Full-
screen
Tap to toggle the video display between normal
size and full-screen display.
Note: When Enhance is selected, the new view will
apply to the following:
• All live video from the camera.
• All recorded video from the camera.
• All motion zones for the camera.
Note: Depending on your mobile device’s setup, the
icon bar may contain additional icons not related to
the UniFi Video mobile app.
Below the icon bar, the following information is displayed:
Camera Name Displays the name of the camera.
Camera Settings Tap Camera Settings to access camera
settings:
• Motion Alert Sound (Available on UVC-Micro and
UVC-Pro only) Set to On to enable the camera’s motion
alert sound, or set to Off to disable the motion alert
sound.
• Camera LED (Available on UVC-Micro only) Set to On to
enable the camera’s LED, or set to Off to disable the LED.
• Image Settings Tap Image Settings to access the
Image Settings screen.
IP Address Displays the IP address of the camera on the
local network.
Firmware Displays the firmware version installed on the
camera.
Status Displays Connected or Disconnected.
Record Mode Displays the recording mode: Off,
OnMotion, or Always. To change the setting, tap the
icon and select the new setting.
Record Resolution Displays the recording resolution:
High, Medium, or Low. To change the setting, tap the
icon and select the new setting.
Recent Recordings Tap Recent Recordings to open a
Recordings screen that lists recordings for the selected
camera only.