Owners manual
36
Appendix A: Mobile App UniFi Video User Guide
Ubiquiti Networks, Inc.
6. Enter your Ubiquiti account username and password
and tap SignIn.
Note: If you do not have a Ubiquiti account yet,
tap Create One, enter all requested info, and tap
Register. Then connect the account to your NVR
as described in “UniFi Video Cloud” on page
31 before continuing.
7. The Select NVR screen appears again. Select the desired
NVR from the list.
8. The app opens. By default, the Cameras screen appears:
The menu bar at the bottom of the screen has icons used
to navigate between the main screens:
• Tap to display the Cameras screen (already selected
by default).
• Tap to display the Recordings screen.
• Tap to display the Settings screen.
Cameras Screen
The Cameras screen displays a list of cameras that are
known to the UniFi controller. For each camera in the list,
the following information is displayed:
• A thumbnail image of the camera’s view (image is faded
if the camera is offline.)
• The name of the camera.
• Date and time of two different events, depending on
the connection status:
• Connected: The date and time of the last recording, or
N/A if no recordings are available.
• Not connected: The date and time when the camera
was last seen by the UniFi Video controller.
• The camera’s connection status: Connected or
Disconnected.
On the Camera screen, you have the following options:
• Select a camera from the list to open the Camera Detail
screen which contains a live video feed from the camera
as well as information on the camera.
• At the top right of the screen, tap
Multi-View
Multi-View to
open the Multi-View screen, which displays live feeds
from four cameras.