Owners manual

32
Chapter 9: Settings UniFi Video User Guide
Ubiquiti Networks, Inc.
Device Discovery
Discover Cameras When set to ON, your NVR will
automatically discover UniFi Video cameras as they
become available on the network. To disable this feature,
click to toggle OFF.
NVR Settings
Click
NVR SETTINGS
to open the NVR Settings window. This will
display the configuration details for the NVR.
IP Address Displays the current IP address of the NVR.
MAC Address Displays the hardware MAC address.
Version Displays the firmware version currently installed
on the NVR.
Model Name Displays the model name of the NVR.
CPU Indicates the percentage of the CPU being utilized
by the NVR.
Memory Indicates the amount of memory used by the
NVR (expressed in megabytes).
Disk Indicates the amount of disk space used on the NVR.
Configure
Configuration
Alias Displays the current name of the NVR.
Recording Path Path to where video clip recordings are
stored on the NVR.
Time Based Purging When enabled, recordings are
deleted after the amount of time specified in the Time To
Retain field.
Time To Retain Defines the number of Hours, Days, or
Weeks to keep recordings before deleting them. This
option is available when Time Based Purging is set to ON.
Space to Keep Free Use the slider to define how much
space should be kept available on the NVR (expressed in
gigabytes).
Tools
Database Synchronization Allows you to analyze the
current NVR database.
Updates
Currently Installed Displays the firmware currently
installed on your NVR. If it is the most recent firmware,
“Upto Date” is also displayed.
Check for Updates Click to check the website for the
latest firmware update (requires Internet connection).
Stats
CPU Displays percentage utilization of the NVR’s
processor over a 24-hour period.
Memory Displays percentage utilization of the NVR’s
memory over a 24-hour period.