Owners manual

31
Chapter 9: SettingsUniFi Video User Guide
Ubiquiti Networks, Inc.
Chapter 9: Settings
(The Settings section is available to administrators only.)
The Settings section provides you with important system
information and configuration options for your NVR.
UniFi Video Cloud
Connect To My Ubiquiti Account/Disconnect From My
Ubiquiti Account To connect your Ubiquiti account with
the NVR, click Connect to My Ubiquiti Account and enter
your credentials (the button will change to Disconnect
From My Ubiquiti Account). You will then be able to access
the NVR from video.ubnt.com using your Ubiquiti
account. To dissconnect your Ubiquiti account from the
NVR, click Disconnect From My Ubiquiti Account.
Camera Password
Camera Password Enter a new password that will be
used by all managed cameras.
Time & Date
Timezone Select the local time zone where the UniFi
Video NVR is located.
Alerts
Enable Connection Alert Emails Whenever a device is
connected or disconnected, an email alert will be sent out
if set to ON. The default setting is OFF.
Enable Motion Alert Emails When a motion event
occurs, an email will be sent out if set to ON. The default
setting is OFF.
Configure Email Alerts Click Configure Email Alerts to
customize the alert settings for each camera managed by
the NVR. To receive email alerts, click to toggle ON.
Firmware Updates
Check UBNT For Updates UniFi Video automatically
checks for system updates but doesn’t install them unless
initiated by an administrator. If you don’t want the NVR to
automatically check for updates, click to toggle OFF.
Report Statistics Statistics are gathered and provided to
Ubiquiti Networks for reference, in an effort to continually
improve performance. To opt out, click to toggle OFF.