Owners manual

12
Chapter 2: Cameras UniFi Video User Guide
Ubiquiti Networks, Inc.
Timestamp Overlay Click to enable or disable the
timestamp from appearing on the live video feed.
Watermark Click to enable or disable the visibility of the
watermark on the live video feed of the selected camera.
RTSP Service
RTSP (Real Time Streaming Protocol) is a network protocol
designed for facilitating the playback of media files.
High
Enable RTSP Service Click to enable the RTSP Service and
display the RTSP URL for the selected camera. The default
setting is OFF.
• RTSP URL URL link to a camera’s live video stream. You
can copy and paste this address into your web browser
for live viewing.
Medium
Enable RTSP Service Click to enable the RTSP Service and
display the RTSP URL for the selected camera. The default
setting is OFF.
• RTSP URL URL link to a camera’s live video stream. You
can copy and paste this address into your web browser
for live viewing.
Low
Enable RTSP Service Click to enable the RTSP Service and
display the RTSP URL for the selected camera. The default
setting is OFF.
• RTSP URL URL link to a camera’s live video stream. You
can copy and paste this address into your web browser
for live viewing.
Recording
Configuration
Record Mode Allows you to define the recording mode of
the selected camera.
• Don’t change This option only appears when multiple
cameras are selected. Choosing this option keeps the
cameras in their current recording mode.
• Don’t record Nothing will be recorded by the camera.
• Always record Enables the camera to record all the
time, regardless if there is motion detected or not.
• Record only motion All captured images are analyzed
and only recorded when motion is detected.
• Record on schedule Allows you to set up a specific
recording schedule for each individual camera.
Choosing this Record Mode will display a Schedule
option. Click the Schedule drop-down menu to create a
new schedule or select from a list of existing schedules.
- New Schedule To create a new recording schedule,
click and drag a block of time on each day you would
like the camera to record. When you are finished,
click Save. You can also update or delete an existing
schedule by clicking to view it in edit mode.
Resolution Choose one of the following three resolutions
to use for the selected camera:
•
High High resolution
•
Medium Medium resolution
•
Low Low resolution
Motion Detection
Zones Click Configure to edit motion zones for the
selected camera. This option does not appear if multiple
cameras are selected, as zones are configured individually.
Minimum Motion Event Trigger Drag the slider control
left or right to set the minimum duration (0 to 5 seconds)
that motion must take place to trigger recording.