Owners manual

6
Chapter 1: Installation UniFi Video User Guide
Ubiquiti Networks, Inc.
4. The Setup Cameras window will appear. Enter a
password (twice to confirm) to be used to manage your
cameras.
5. A list of cameras will be displayed, allowing you to
select the cameras to be controlled by the NVR.
6. If you do not want to add cameras at this time:
a. Click Skip this Step.
b. The UniFi Video Management software opens and
displays the Cameras page.
c. Setup is complete.
7. To add the camera(s), select them as follows:
a. Click the check box next to the camera in the list.
b. Click Add Selected Cameras.
8. Wait while the firmware for the selected camera(s) is
updated.
9. When the firmware update is complete, “Setup
Complete” is displayed. Click Go to Live View to display
the cameras on the Live View page of the UniFi Video
Management software:
Proceed to the appropriate chapter for information on
using the UniFi Video Management software:
• “Cameras” on page 9
• “Map” on page 15
• “Live View” on page 17
• “Timeline” on page 19
• “Recordings” on page 23
• “Alerts” on page 25
• “Users” on page 27
• “Settings” on page 31